PH Retrofit Kits
PH Retrofit kits PB left and front Gammon Gauges comes Alum/Stainless Steel
Fueling Adapter Wear Gauge
This gauge tests fueling adapters for excessive wear in less than one minute. Our wear gauge quickly determines whether the lugs are excessively worn. For more information see Bulletin No.156
EI/API Wear Gauge
The GTP-9410 Wear Gauge is specially designed to detect wear on 4” EI/API adapters for hydrant system pit valves and truck loading adapters. Adapters wear in three areas, the top, the outside diameter and on the clamping surface. This simple instrument adds the wear on these surfaces into one measurement, and provides a simple indication that the adapter needs to be replaced.
This unique patented design makes checking for wear simple; it takes just seconds. Included is a gauge block, factory calibrated to allow you to calibrate the gauge accurately before each use. Instructions and a Pelican case are also included.
NOTE: This wear gauge does not detect damage, only normal operational wear. A complete visual/hand inspection is also needed to ensure that the adapter is truly safe for use.
For more information see Bulletin No.170
Nickle plated Piston for Gammon Gauge
Replacement vent port assembly for Gammon Gauge.
Gammon Gauge spring 0-15 PSI Red
Gammon Gauge spring, 0-30 PSI Blue
Aluminum bleeder plug for Gammon Gauge
Stainless Steel bleeder plug for Gammon Gauge
Aluminum cage for Gammon Gauge
Gammon Gauge stainless steel strainer set
Gammon Gauge scale 0-15 PSI