Heavy-duty manual bonding/grounding reel. Stainless steel, black nylon. This the simplest form of static bonding cable reel. Small, light weight and durable.

NOTE:This part number is for the reel ONLY, no accessories.

For more information see Bulletin No.163

Industrial static cable reel with 50ft of UNCOATED cable and alligator clip.

The Ametek static discharge and bonding reels provide for the retraction and compact storage cable and clamp assemblies. Designed to function under extreme environmental conditions. Our 50 and 75 feet models meet USAF specification MIL-R-83232B.

Clear, high-quality 7x7" galvanized steel grounding cable 3/32" coated with tough vinyl to 1/8" or 3/16" and highly conductive. NSN# 4930011497904.

For more information see Bulletin 98.

High quality 7x7 galvanized steel cable 3/32” diameter coated to 5/32” diameter. The tough vinyl coating also allows great flexibility. Highly conductive.

For more information see Bulletin No.98

Our premium GTP-2869 cable with its oversized 5/32” specially compounded DuPont Hytrel® polyester coating is even tougher than our standard vinyl and the coating adds to the kink resistance of the cable. Resistance to wear and cutting is amazing.

NOTE: Hytrel cable has a higher electrical resistance. If you want to meet Mil Spec on connectivity, we recommend GTP-1299 HVO cable (galvanized steel). Flashlight type testers cannot be used to test stainless cable. A meter (V.O.M.) should be used when testing this cable.

For more information see Bulletin No.98

You can reduce your problems with kinks and tangles by using this special cable. Resistance to kinking is accomplished by making the cable of specially wound stainless steel instead of galvanized steel.

For more information, see Bulletin 98.

This special coating is formulated with a high-tech neon dye which remains visible even in low light. The tough vinyl coating gives long life. This cable is made with our standard 7x7 galvanized steel wire construction, 3/32” coated to 1/8" or 3/16”.

For more information see Bulletin No.98

Brass grounding plug, includes hex and cap to secure cable.

For more information see Bulletin 55.

Passivated stainless steel grounding plug, includes hex and cap to secure cable.

For more information see Bulletin 55.

Static charges are developed at a very high rate when aviation turbine fuel is passed through a filter membrane. These charges develop at an even higher rate when the fuel contains anti-static additive, but they are easily carried away by electrically bonding and grounding. Our model GTP-1110 is specially designed for this purpose.

For more information go to Bulletin 8.

GAMMON GATOR GROUNDING CLAMP

Heavy Duty Clamp, U.S. Air Force Type meets MIL-C-83413/7 and is also made to Air Force Logistics Command Drawing 7049881.

For more information see Bulletin No. 55.

Heavy-duty Mueller-type clips. Solid copper. Sold in sets of 12.

For more information see Bulletin No. 55

Heavy-duty Mueller-type clips. Zinc-plated steel. Sold in sets of 12.

For more information, see Bulletin 55.

Grounding Plug/Clip Cable Assembly

90" Overwing Grounding/Bonding assembly with copper clip. Galvanized steel cable coated to 1/8" with clear vinyl. NFPA requirement you must ground before removing cap on aircraft.

For more information see Bulletin 55.

STOP BALL - CABLE

Cable stop assembly. For more information see Bulletin 55.

Use on 1/4" I.D. hose and 3/8" I.D. hose.

For more information, see Bulletin 78.

The flexible grounding socket mounts with a single screw and swings in line with the grounding cable. There is no need for a grounding reel on the loading rack or to use the grounding reel on the truck.

StaticLube is a lubricant specifically designed to conduct electricity. It is made with a high-quality synthetic lubricant and filled with superfine silver for electrical conductivity. It is not silicone based. It is highly thermally conductive to help protect bearings. It blocks corrosion and protects bearing surfaces from water.

When attaching any 1” nozzle, allows you to bond the nozzle to the tank before you remove the tank cap and maintain that bond reliably. The cable is a full 4’ of heavy 1/8” vinyl coated 7x7 galvanized steel with a heavy duty copper clamp.