Aqua-Glo Kit - Series V
Series V Aqua Glo measures water (to ASTM D 3240) content of Jet Fuel. Detects presence of free water from 1-12 ppm within 1.5 ppm. The AQUA-GLO® Kit employs this unique approach in the determination of the degree of fluorescence (or water content). NSN #6635002449478. For more information see
Bulletin No.86
Aqua-Glo Combination Kit
The Series V Aqua-Glo was introduced in 2005 with an entirely new power supply. This power supply is external, automatically switching to work with either 120 VAC or 220VAC, 50/60 Hz.Extreme care has been taken in perfecting a standard that will not deteriorate with age. NSN # 6640011382563 For more information see
Bulletin No.86
MiniMonitor Mark II Complete Test Kit
NSN # 6640010054490.
The MiniMonitor® Kit is used to test aviation fuel
for particulate contamination using the
procedures described in ASTM D2276/IP216. A
measured volume of fuel is passed from a
flowing pipe directly through a 0.8 micrometer
membrane. The plastic monitor holding the
membrane is placed in an aluminum housing.
Dirt particles are caught on the membrane which
can be visually color rated or weighed for a
gravimetric rating.
The new style of carrying case provides a cavity
which accepts the assembled kit, eliminating the
need to disassemble each time the apparatus is
stored.
For more information see
Bulletin No. 8.
B-2 Digital Refractometer
A quick, easy method for determining the volume percent (%v.) of anti-icing additive (FSII) in jet turbine engine fuels. Operator error is minimized and the test is faster.
For more information see Bulletin 145.
⅓ U.S gallon- In-Tank Sampler
The unique model GTP-9021 was developed specifically to fit through the small gauging found on U.S. Air Force bases where level gauging electric cables are also present. It was important that there be no tangling of our sampler with those cables and that those cables not be damaged. Therefore, the outside diameter is only 3.1 in (79 mm).
For more information see Bulletin No. 115.
Float Tester
Water Sump Float Tester for testing the emergency shut down system on aircraft refueling systems. A controlled volume of water is slowly pumped by hand into the filter separator sump. If the emergency shut down system is operating correctly, fuel flow will stop automatically when the level of water in the sump reaches the sensors. For more information go to
Bulletin No.63
Float Tester
Tester with two wheeled cart, transparent measuring container at top has adjustable level indicator that the operator can see that all of the water that was pumped into the filter separator sump has been recovered. Water filling port is at top see chained plug, overflow pipe carries excess fuel to five gallon slop collector on lower platform. For more information see
Bulletin No.63
Meter Monitor US/G
The meter monitor makes closed circuit membrane testing possible and avoids the need for a measuring bucket and the need to dispose of fuel. For more information see
Bulletin No.65
Meter Monitor Liters
The meter monitor makes closed circuit membrane testing possible and avoids the need for a measuring bucket and the need to dispose of fuel. For more information see
Bulletin No.65
Aircraft Refueling Hose Tester
The Gammon Aircraft Refueling Hose Tester is made of non-ferrous materials, designed for periodic testing of jet refueling hose, using jet fuel for pressurizing.
The unit consists of a 10 U.S. gallon (38 liter) aluminum tank (GTP-2234) equipped with a vented fill cap, hand pump (
GTP-8076), 0-1000 psi 4.5” face pressure gauge (
GTP-281-H), quick disconnect (GTP-1004-4MA), and six feet of 1/4” hose (
GTP-8079) to connect to the tester.
For more information see
Bulletin No. 79
Hose Assy
Hose Assembly, outlet, for GTP-191 pad holder assembly for the Aqua-Glo unit. For more information see
Bulletin No.86
MiniMonitor Assembly Only
This is the MiniMonitor assembly only, separate from the MiniMonitor kit (
GTP-172).
The MiniMonitor® is used to test aviation fuel for particulate contamination using the procedures described in ASTM D2276/IP216. A measured volume of fuel is passed from a flowing pipe directly through a 0.8 micrometer membrane. The plastic monitor holding the membrane is placed in an aluminum housing. Dirt particles are caught on the membrane which can be visually color rated or weighed for a gravimetric rating.
For more information see
Bulletin No. 8.
Aqua-Glo Pads
The water detector pads are used in the Aqua-Glo Kit to ASTMD 3240, and are produced in compliance with MIL-D-81248 {WP} . Each pad is packaged in an air and moisture proof envelope. NSN # 6640002353820. For more information see
Bulletin No.86
Syringe
SYRINGE, MINIMONITOR/AQUA-GLO
Standards Set
Fluorescing and Calibrating Standards Set for Aqua-Glo water detection
ASTM Color Rating Booklet
Color Rating Booklet used for color rating filter membranes for aviation turbine fuels in accordance with Appendix X1 of ASTM Test Method D2276/IP216.
For more information see Bulletin No. 80.
Color And Particle Rating Chart
In presenting all 33 colors and the 9 particle photographs on one 8 1/2"x11"chart, our model provides convenience that has never before been achieved. Particle assessment is a requirement in Section 2-17 of ATA-103, along with color rating. For more information see
Bulletin No. 133
Air Force Color Rating Book
This booklet contains the same color rating pages as the standard booklet, with the addition of a particle assessment rating guide at the back of the book.
For more information see Bulletin 80.
Filter Test Membranes
Single Membrane Refills for particulate contamination detection by color, with 100 membranes and 100 support pads. Approved for testing jet fuel per ASTM Methods D2276/IP216 D5452. Interchangeable with Millipore P/N AAWP-037-PO. For more information see
Bulletin No.73