Home > Bonding & Grounding > Cables
Sort By:
Page of 1
Clear Grounding Cable Clear Grounding Cable

Clear, high-quality 7x7" galvanized steel grounding cable 3/32" coated with tough vinyl to 1/8" or 3/16" and highly conductive. NSN# 4930011497904.

For more information see Bulletin No. 98

5/32" Yellow PVC Grounding Cable 5/32" Yellow PVC Grounding Cable

High quality 7x7 galvanized steel cable 3/32” diameter coated to 5/32” diameter. The tough vinyl coating also allows great flexibility. Highly conductive.

For more information see Bulletin No.98

5/32" Hytrel Kink Resistant Bright Yellow Cable 5/32" Hytrel Kink Resistant Bright Yellow Cable

Our premium GTP-2869 cable with its oversized 5/32” specially compounded DuPont Hytrel® polyester coating is even tougher than our standard vinyl and the coating adds to the kink resistance of the cable. Resistance to wear and cutting is amazing.

NOTE: Hytrel cable has a higher electrical resistance. If you want to meet Mil Spec on connectivity, we recommend GTP-1299 HVO cable (galvanized steel). Flashlight type testers cannot be used to test stainless cable. A meter (V.O.M.) should be used when testing this cable.

For more information see Bulletin No.98

1/8" Vinyl Kink Resistant Bright Yellow Cable 1/8" Vinyl Kink Resistant Bright Yellow Cable

You can reduce your problems with kinks and tangles by using this special cable. Resistance to kinking is accomplished by making the cable of specially wound stainless steel instead of galvanized steel.

For more information, see Bulletin 98.

High Visibility Orange Grounding Cable High Visibility Orange Grounding Cable

This special coating is formulated with a high-tech neon dye which remains visible even in low light. The tough vinyl coating gives long life. This cable is made with our standard 7x7 galvanized steel wire construction, 3/32” coated to 1/8" or 3/16”.

For more information see Bulletin No.98

Hose Assembly Hose Assembly

Static charges are developed at a very high rate when aviation turbine fuel is passed through a filter membrane. These charges develop at an even higher rate when the fuel contains anti-static additive, but they are easily carried away by electrically bonding and grounding. Our model GTP-1110 is specially designed for this purpose.

For more information go to Bulletin No. 8.

Grounding Plug/Clip Cable Assembly Grounding Plug/Clip Cable Assembly

Grounding Plug/Clip Cable Assembly

Grounding Clip Cable Assembly Grounding Clip Cable Assembly

90" Overwing Grounding/Bonding assembly with copper clip. Galvanized steel cable coated to 1/8" with clear vinyl.  NFPA requirement you must ground before removing cap on aircraft. For more information see  Bulletin No.55

Stop Ball Stop Ball

STOP BALL - CABLE

Cable Stop Cable Stop

Cable stop assembly. For more information see Bulletin 55.