Home > Filter Accessories
Sort By:
Page of 1
Air Eliminator Air Eliminator

The most reliable air eliminators, 1/16" air outlet orifices. Structural pressure rating is 250 psi on all models. Repairable replacement parts available. For more detailed information see Bulletin No. 52

Air Eliminator Air Eliminator

Cast Iron air elimintor the most reliable air eliminators, 1/16" air outlet orifices. Repairable replacement parts available. For more detailed information see Bulletin No. 52

Air Eliminator Air Eliminator

Stainless steel high air flow at 150 psi, releases air at 9.44 cfm. Maximum operating pressure 400 psi. Structural pressure rating 500 psi. For more information see Bulletin No. 52

Air Regulator Air Regulator

Air regulator-panel mount with aluminum knob.

For more information see Bulletin No. 70

Air Regulator Air Regulator

Air regulator-panel mount with plastic knob. For more information go to Bulletin No. 70

Air Regulator Air Regulator

Tamper-proof Air Pressure Regulator side mount with aluminum knob. For more information see Bulletin No. 70

Air Regulator Air Regulator

Air Pressure Regulator side mount with plastic knob. For more information see Bulletin No.70

Key for Air Pressure Regulator Key for Air Pressure Regulator

Optional key for the GTP-1121A or GTP-1121P. Aluminum knob is not included.

For more information see Bulletin No. 70

Jet Test Actuator with Gauge Jet Test Actuator with Gauge

Jet test actuator w/ gauge, (as shown) consists of GTP-1174 gauge and GTP-1173A actuator. For more information see Bulletin No. 46

1 1/2" Liquid Filled Pressure Gauge 1 1/2" Liquid Filled Pressure Gauge

Liquid-filled pressure gauge. Steady pointer reading even when pressure is pulsating or in cases of excessive vibration. Silicone filled.
For more information see Bulletin No.92

Jet Test Actuator with Gauge (short) Jet Test Actuator with Gauge (short)

Short jet test actuator, with gauge. Short versions are used for Avery-Hardoll (now Meggitt) nozzles.

For more information see Bulletin 46.

2" Center Back Mount Pressure Gauge 2" Center Back Mount Pressure Gauge

2" face pressure gauge, brass center-back mount.

For more information see Bulletin No. 70

2" Pressure Gauges 2" Pressure Gauges

2" Pressure gauge,with  brass stem connection

4 1/2” Pressure Gauges 4 1/2” Pressure Gauges

For more information see Bulletin No. 92.

Check Valve Check Valve

Check Valve for Air Elim. 3/4" NPT. 300 SERIES . Prevents entry of air to the filter vessel through the air eliminator when main piping check valves leak. Insures that the vessel remains full of fuel. For more information see Bulletin No.52

Check Valve/BSP Check Valve/BSP

BSPT Check Valve use on the 3/4" Air eliminator for more information see Bulletin No.52

Air Eliminator Check Valve, 1/2"NPT Air Eliminator Check Valve, 1/2"NPT

Air Eliminator outlet check valves prevents drain back. For more informationesee Bulletin No. 52

Socket Adapter for Parker/Velcon Elements Socket Adapter for Parker/Velcon Elements

Socket adapter for coalescer elements. Designed to fit Velcon Filter Inc. TB type coalescer elements, this socket will accept standard 1/2" square drive torque wrenches and extensions. For more information see Bulletin No. 71

Heater Heater

HEATER, 300 WATTS, 1-1/4" NPT

Air Eliminator Check Valve, 1/2" BSPT Air Eliminator Check Valve, 1/2" BSPT

Air eliminator check valve prevents entry of air to the filter vessel through the air eliminator when main piping check valves leak or the vessel level is reduced. For more detailed information go to Bulletin No. 52

GTP-2607S GTP-2607S

SNUBBER, S/S 1/4" NPT

Check Valve/BSPT Check Valve/BSPT

Check Valve, Air Eliminator, 3/4"NPT/BSPT

2 1/2" Pressure Gauge, 0-160psi 2 1/2" Pressure Gauge, 0-160psi

2 1/2" face pressure gauge, brass lower mount.

For more information see Bulletin No. 70

3 ½” Pressure Gauge 3 ½” Pressure Gauge

Pressure Gauge ,3½ “ Face 100PSI S/S Stem MTD.

2.5" Pressure Gage S/S ,0-100psi 2.5" Pressure Gage S/S ,0-100psi

2.5" PRESSURE GAGE S/S, 0-100 PSI, stem connection

Dummy Monitor Element Dummy Monitor Element

Our “dummy” elements are carefully machined from high grade aluminum and designed to replace any
brand of 2” outside diameter element in any vessel. The seal is a Viton o-ring. Includes an adjustable
center “rest” to allow easy installation in vessels with element aligning guides. Needs no additional
hardware, works with cover interlocks.

Socket Adapter for Facet Elements Socket Adapter for Facet Elements

Socket adapter for coalescer elements. Designed for FACET HEX. TB type coalescer elements, this socket will accept standard 1/2" square drive torque wrenches and extensions. For more information see Bulletin No. 71

2 1/2" Liquid Filled Pressure Gauges 2 1/2" Liquid Filled Pressure Gauges

Steady pointer reading even when pressure is pulsating or in cases of excessive vibration. Silicone filled.

For more information see Bulletin No. 92.