Float Tester
Tester with two wheeled cart, transparent measuring container at top has adjustable level indicator that the operator can see that all of the water that was pumped into the filter separator sump has been recovered. Water filling port is at top see chained plug, overflow pipe carries excess fuel to five gallon slop collector on lower platform. For more information see
Bulletin No.63
Additive Injection Pump
This pump is used with GTP-9076 or TL-9276. When ordering please indicate which additive you need. Example: Prist®,
Digital Viper Additive Injector
The Digital Viper adds inexpensive electronic control and interface, and will operate on TWO METERS SIMULTANEOUSLY! It has the great advantage of being controlled by a Veeder Root programable electronic counter. The same Viper can be used with a meter (or even two meters at once) calibrated in tenths of gallons, gallons, liters, dekaliters or whatever. For more information see
Bulletin No.36
Viper Eclipse
Fully automatic additive injection system,auto-monitoring, self-adjusting. The ultimate in additive injection systems, longer life and less expensive than competitors. For more detailed information go to
Bulletin No.161
Clear Grounding Cable (per ft)
Grounding Cable Clear Coated high quality 7x7" galvanized steel cable 3/32" coated with tough vinyl to 1/8". NSN# 4930011497904.
This cable is sold by the foot. For more information see
Bulletin No.98
Kink Resistant Cable (per ft)
Kink Resistant Cable- Yellow, 3/32" coated to 5/32" Dupont Hytril. You can reduce your problems with kink and tangles by using this special cable. Our premium GTP-2869 cable with it's oversized 5/32" specially compounded Dupont Hytril polyester coating is even tougher than our standard vinyl and the coating adds to the kink resistance of the cable. For more information see Bulletin No.98
-1.jpg?1391692186 "Deadman Hose (per ft)")
Deadman Hose (per ft)
Air Deadman Hose is manufactured to Gammon's specifications, this hose is superior to any available air deadman hose on the market.
(This is sold by the foot) For more information see
Bulletin No.78
JP-8
JP-8 3M-Decal 2"x 15" use to identify Kerosene grades . For more information see Bulletin No.74
Nozzle Band
3M Nozzle Band Decals are used on overwing nozzles to positively identify the fuel type. These band decals are made to the industry standard and are 7/8” x 10” long. For more information see
Bulletin No.74
Hose Clamp
Hose Clamp for GTP-2424/2425. Stainless steel, fits hoses having O.D. of 3/8" to 25/32" for more information see Bulletin No. 78
Rotatable Tube Connector
Female Rotatable Tube Connector nut will rotate to allow tightening but will not swivel when tightened. For more information see BULLETIN 78
Numbers Decal
Peel and stick numbers on a 5 1/4" x 10 3/4" 3M sheet for GTP-2135-19 and GTP-2135-20. For more information see
Bulletin No. 74
Lead Decal
Lead Decal is used for Avgas and Leaded gas dispensers. This Decal is black on white and made with 3M Material for information see
Bulletin No.74
Oring
O-ring, Fluorosilicone, Biobor.
Record Date Decal
Date Filters Changed 3M Decal (4 1/4"x11") is used to record date filter was changed and reminder of upcoming due date. (See -24 for numbers decal) Filters changed, black background with white letters. For more detailed information see
Bulletin No. 74
Slug Tested Decal
Water Slug Valve Tested decal 4 1/4" x 11 1/4" band made with 3 materal. (See GTP-2135- 24 for numbers decal) Blue background with white letters. For more information see
Bulletin No.74
