Home > Products > Fuel Quality Testing > MiniMonitor & MultiMiniMonitor
Sort By:
Page of 1
MiniMonitor Mark II Complete Test Kit MiniMonitor Mark II Complete Test Kit

NSN # 6640010054490.

The MiniMonitor® Kit is used to test aviation fuel for particulate contamination using the procedures described in ASTM D2276/IP216. A measured volume of fuel is passed from a flowing pipe directly through a 0.8 micrometer membrane. The plastic monitor holding the membrane is placed in an aluminum housing. Dirt particles are caught on the membrane which can be visually color rated or weighed for a gravimetric rating.

The new style of carrying case provides a cavity which accepts the assembled kit, eliminating the need to disassemble each time the apparatus is stored.

For more information see Bulletin No. 8.

Flushing Head Valve and Monitor Housing for MiniMonitor Flushing Head Valve and Monitor Housing for MiniMonitor

Flushing head valve and monitor housing used for the MiniMonitor (GTP-172-H) and MiniMonitor Kit (GTP-172).

MultiMiniMonitor Assembly Only MultiMiniMonitor Assembly Only

This is the MultiMiniMonitor assembly only, separate from the MultiMiniMonitor kit (GTP-1172).

For more Information see Bulletin No. 8.

MiniMonitor Assembly Only MiniMonitor Assembly Only

This is the MiniMonitor assembly only, separate from the MiniMonitor kit (GTP-172).

The MiniMonitor® is used to test aviation fuel for particulate contamination using the procedures described in ASTM D2276/IP216. A measured volume of fuel is passed from a flowing pipe directly through a 0.8 micrometer membrane. The plastic monitor holding the membrane is placed in an aluminum housing. Dirt particles are caught on the membrane which can be visually color rated or weighed for a gravimetric rating.

For more information see Bulletin No. 8.

Flushing Head Valve Assembly for MiniMonitor Flushing Head Valve Assembly for MiniMonitor

FLUSHING HEAD VALVE ASSEMBLY FOR GTP-172

Syringe Syringe

SYRINGE, MINIMONITOR/AQUA-GLO

Flexible Extension Tube Flexible Extension Tube

This tube was made especially for the U.S. Air Force and for customers who have sampling connections in difficult places to reach. The overall length is 10" (250mm). The quick disconnect at the left end connects to the actuator at the inlet of the MiniMonitor® housing. The actuator at the other end has the same dimensions as the one on the MiniMonitor®. The Teflon® tubing is covered by stainless steel wire braid.

The standard quick disconnect is the GTP-992-4FS . The actuator at the other end of the extension tube is GTP-722. Dust caps can be purchased separately for both the QD and the actuator.

NSN # 4720012308529.

For more information go to Bulletin No. 8.

Bypass Quick Disconnect and Hose Assembly Bypass Quick Disconnect and Hose Assembly

Bypass quick disconnect and hose assembly for MiniMonitor assembly (GTP-1172) and MiniMonitor Kit (GTP-172).

Bypass Tee for MiniMonitor Bypass Tee for MiniMonitor

TEE-CHECK VALVE FOR MINIMONITOR

Mini Monitor Case Mini Monitor Case

Heavy duty case for MiniMonitor and Multi MiniMonitor.

Closed Loop MiniMonitor Closed Loop MiniMonitor

The Closed Loop MiniMonitor® eliminates the bucket used in testing for particulates in jet fuel. It reduces spills, waste and personnel exposure by keeping the fuel completely inside the fuel system itself. All the test fuel is recoverable.

O-ring for MiniMonitor Lower Cap, Viton/GLT O-ring for MiniMonitor Lower Cap, Viton/GLT

O-RING FOR MINIMONITOR LOWER CAP & S.E.T. KNOB STEM, VITON GLT

O-ring for MiniMonitor Inner Seal, Viton/GLT O-ring for MiniMonitor Inner Seal, Viton/GLT

MINIMONITOR O-RING, INNER SEAL, VITON

O-ring for MiniMonitor Valve to Body, Viton/GLT O-ring for MiniMonitor Valve to Body, Viton/GLT

MINIMONITOR O-RING, VLV TO BODY, VITON

Tray Assembly for Closed Loop MiniMonitor Tray Assembly for Closed Loop MiniMonitor

Trays and testers sold separately, mount one tray on each truck and at the fuel farm, buy just one (or two if needed) Closed Loop MiniMonitor®.

For more information see Bulletin 169

Multi Mini-Monitor Kit Multi Mini-Monitor Kit

The Gammon Multi MiniMonitor Test Kit is made for operators who have to take samples from sampling points that are equipped with various different types of quick disconnects. The standard configuration of this kit includes the GTP-988 Double-Ended Adapter, but kits can be custom ordered with other fittings including the GTP-988-1, GTP-988-2, GTP-1170A, and GTP-1170B.

For more information see Bulletin No. 8