Home > Valves & Nozzles
Sort By:
Page of 3
Gammon Skyhawk Nozzle 1500 Gammon Skyhawk Nozzle 1500

SKYHAWK 1500 Overwing Nozzle w/oval spout, dust cap & ground cable

Toggle Valve Toggle Valve

TOGGLE VALVE, 1/8" NPT M X F ALUM. FOR GTP-191

Pressure Relief Valve 150 PSI Pressure Relief Valve 150 PSI

Bronze Valve standard setting 150 PSI for more information see Bulletin No. 52

Pressure Valve 150 psi Pressure Valve 150 psi

Bronze, available settings from 5 to 300 psi, non-certified. 3/4" male x 3/4" female for more information see Bulletin No. 52

Pressure Relief Valve Pressure Relief Valve

Carbon steel, 3/4" male x 1" female Stainless Steel Internals relieves pressure caused by thermal build-up standard setting 150psi. For more information see Bulletin No. 52

Water Drain Valve Water Drain Valve

Air operated water drain valve assembly. Stainless steel and aluminum construction with a 1" connections. Break away groove prevents accidental tank drainage in case of accident.

For more information go to Bulletin No. 71.

Drain Valve Drain Valve

Brass body, brass shaft with a stainless steel spring drain valve and nitrile compound seal. Heavy duty construction to withstand exposure and external wear and tear. For more information see Bulletin No.71

Nozzle Connector Wear Gauge Nozzle Connector Wear Gauge

Stainless Steel Connector Tester for F116/F117/F211 Nozzles. Detects if the nozzle interlock is worn past safe limits. For more information see Bulletin No. 165

Nozzle Gauge Nozzle Gauge

Liquid filled nozzle pressure gauge with heavy duty stainless steel mount and guard.

For more information see Bulletin No. 135

D-ring D-ring

D-ring fits F116 or F117 nozzle

For more information see Bulletin No. 135.

Fueling Adapter Fueling Adapter

The three-lug adapter is manufactured in accordance with MS-24484-2 and will accept any aircraft refueling nozzle made by Whittaker, Carter, Zenith, or Avery Hardoll. It will also receive 2 1/2” bottom loading couplers made by these firms but it is not available to accept the product selection feature. It will also receive any U.S. military refueling nozzle that is manufactured to MIL-N-5877.

The connection has a 3” NPT female thread and is made of type 6061 aluminum with an anodized finish.

A plastic dust cap is included. For the optional pressure sealing cap, call us to order SC-8167-SC.

For more information go to Bulletin No.124

Jet Test Actuator with Gauge Jet Test Actuator with Gauge

Jet test actuator w/ gauge, (as shown) consists of GTP-1174 gauge and GTP-1173A actuator. For more information see Bulletin No. 46

Jet Test Actuator with Gauge (short) Jet Test Actuator with Gauge (short)

Short jet test actuator, with gauge. Short versions are used for Avery-Hardoll (now Meggitt) nozzles.

For more information see Bulletin 46.

Jet Test Actuator (STD Long) Jet Test Actuator (STD Long)

Standard Stainless Steel the actuator can be attached permanently to the test apparatus or pressure gauge. NSN# 1680011329426. For more information see Bulletin No. 14

Jet Test Actuator Short Jet Test Actuator Short

Jet Test Actuator Short version is available to fit the "S"and "AH" couplers. 300 Series, stainless steel. For more information see Bulletin No.14

Dust/Seal Plug - Standard, Tee Dust/Seal Plug - Standard, Tee

Dust/seal plug, standard length, with tee end. Suitable for use with the standard GTP-235-3/8 Jet Test QD® coupler.

For more information see Bulletin No. 14

Check Valve Check Valve

Check Valve for Air Elim. 3/4" NPT. 300 SERIES . Prevents entry of air to the filter vessel through the air eliminator when main piping check valves leak. Insures that the vessel remains full of fuel. For more information see Bulletin No.52

Check Valve/BSP Check Valve/BSP

BSPT Check Valve use on the 3/4" Air eliminator for more information see Bulletin No.52

Dust/Seal Plug - Short, Knurled Dust/Seal Plug - Short, Knurled

Dust/seal plug, short length, with knurled end. Suitable for use with -AH or -S type Jet Test QD® couplers.

For more information see Bulletin No. 14

Dust/Seal Plug Dust/Seal Plug

Dust/Seal plug short. For more information see Bulletin No.14

3-Way Ball Valve 3-Way Ball Valve

3-Way Ball Valve was designed to assure you that pressure drop data will be obtained correctly. Now you can get reliable pressure drop data from inexperienced personnel. For more information see Bulletin No.92

3 Way Ball Valve for the Viper 3 Way Ball Valve for the Viper

GTP-2305-1-070 Three way test valve for Kathon,Ci/Li, Stadis 450, +100 used on the Additive Injector Systems

Panel Mounted 3 Way Ball Valve Panel Mounted 3 Way Ball Valve

Panel Mounted 3 Way Ball Valve

Ball Valve For Gauge Testing Ball Valve For Gauge Testing

GTP-2305-2-070 Three way test valve for FSII used on the Additive Injector Systems
.

Seal Kit Seal Kit

Seal Kit

Sampling Valve Sampling Valve

Sample Toggle Valve Assembly, this is used with GTP-1173A actuator for connection to GTP-235 Jet Test QD. NSN #4820011707087. For more information see Bulletin No. 46

Sampling Ball Valve Sampling Ball Valve

Sample Valve Assembly has GTP-235-2 actuator for connection to GTP-235 Jet Test QD. NSN # 4820011581427. For more information see Bulletin No. 46

Jet Test Actuator Jet Test Actuator

Jet Test actuator, no gauge. For more information see Bulletin No. 46

Jet Test Actuator (short) Jet Test Actuator (short)

Short jet test actuator, with no gauge. Short versions are used for Avery-Hardoll (now Meggitt) nozzles.

For more detailed information go to Bulletin No. 46

Strainer Strainer

Strainer for GTP-920-2 Stainless Steel. NSN# 4730010845226 for more information see Bulletin No.31