Home > Products > Fuel Quality Control > Aqua-Glo
Sort By:
Page of 1
Aqua-Glo Kit- Series V

Series V Aqua Glo measures water (to ASTM D 3240) content of Jet Fuel. Detects presence of free water from 1-12 ppm within 1.5 ppm. The AQUA-GLO® Kit employs this unique approach in the determination of the degree of fluorescence (or water content). A single, permanent fluorescing standard is positioned under a photographic-type iris diaphragm which can be opened or closed to increase or decrease the amount of ultraviolet light. NSN #6635002449478. For more information see Bulletin No.86

Aqua-Glo Combination Kit

Aqua-Glo Series V Water Detector-Minimonitor Contamination for contamination testing is per ASTM D2276. NSN # 6640011382563. For more information see Bulletin No.86

Aqua-Glo-MultiMinimonitor Combination Kit

Aqua Glo Multi-Minimonitor Kit, Series V, 110-120/208-240VAC, Single Phase, 50/60Hz. For more information see Bulletin No.86

Hose Assy

Hose Assembly, outlet, for GTP-191 pad holder assembly for the Aqua-Glo unit. For more information see Bulletin No.86

Toggle Valve

Toggle Valve 1/8" NPT MXF Alum, used on the pad holder assembly for the Aqua-Glo

Aqua-Glo Pad Holder

Aqua-Glo Pad Holder Assembly used with GTP-25 water detector pads (25mm) for more information see Bulletin No. 86

Aqua-Glo Pads

The water detector pads are used in the Aqua-Glo Kit to ASTMD 3240, and are produced in compliance with MIL-D-81248 {WP} . Each pad is packaged in an air and moisture proof envelope. NSN # 6640002353820. For more information see Bulletin No.86

Aqua-Glo Series V w/Power Cord and Standards

Aqua-Glo Water Detector Series V Only with power cord and standards. 120/220 Vac. For more information see Bulletin No. 86

Power Supply

External Power Supply,120-240 Vac for Aqua-Glo Series V only

Upgrade kit

Upgrade kit for the Aqua-Glo Series III to V for more information see Bulletin No.86

Tweezers

Tweezers for the Aqua-Glo Pads. NSN# 6635012329536. For more detailed information go to Bulletin No.86

Calibrated Plastic Bottle

Calibrated Plastic Bottle 500 ML for Aqua-Glo Kit. For more information see Bulletin No.86

Standards Set

Fluorescing and Calibrating Standards Set for Aqua-Glo water detection

Monitor Holder

Stainless steel holder for Aqua-Glo water detector pads (25 mm). Allows Aqua-Glo Test using mini-monitor samples. (Army) NSN # 6630012329542. For more information see Bulletin No. 08

Monitor Holder

Stainless steel holder for water detector pads (37 mm)

Battery

Internal/External Battery, rechargeable, nickel cadmium. Replacement part of the Aqua-Glo Series. For more information see Bulletin No.86

AQUA-GLO Ultraviolet Tube

Replacement ultraviolet tube used in the Aqua-Glo. For more detailed information go to Bulletin No. 86

Screwdriver

Screwdriver calibrating used to calibrated the Aqua-Glo

Case

Heavy Duty Aqua-Glo Case for GTP 322 & 323

Aqua-Glo Holder/US Navy

Aqua-Glo PadHolder/US Navy

External Battery Cable For A/G Series V

Power Cable for the external Battery, Aqua Glo Series V