Home > Fuel Gravity & Density
Sort By:
Page of 2
Plastic Hydrometer Jar Plastic Hydrometer Jar

GTP-1073A
Hydrometer Jar with spill-over cup, Plastic HDPE, 15" high.
Suitable for all petroleum products.

See also GamGram 19 for important information about how to read a Hydrometer.

API Gravity Conversion Calculator - FAHRENHEIT API Gravity Conversion Calculator - FAHRENHEIT

GTP-3012-1A
API Gravity & Relative Density Calculator to convert observed reading to a constant 60 deg. F

Density Calculator - CELCIUS Density Calculator - CELCIUS

GTP-2727EF
Converts Density Reading Taken With a Hydrometer to Corrected Density at 15 Degrees Celcius

x Certificate of Calibration Nist Traceable, ISO/IEC 17025 Accredited **STANDARD LEAD TIME IS 4 WEEKS A.R.O.** x Certificate of Calibration Nist Traceable, ISO/IEC 17025 Accredited **STANDARD LEAD TIME IS 4 WEEKS A.R.O.**

NIST calibrated reference hydrometers and thermohydrometers at the required Density/API test points (as specified by ASTM or the customer). At least three readings of the clients instrument (and at least six readings of the NIST reference standard) are taken at each test point. Readings are resolved under magnification to approximately one-tenth of the smallest scale division and are carefully noted. We report the mean of a minimum of three closely correlated readings

Hydrometer: 700/750 kg/m3, 330mm, ASTM 313H Hydrometer: 700/750 kg/m3, 330mm, ASTM 313H

GTP-1856
Hydrometer: 700/750 kg/m3, 330mm, ASTM 313H

Hydrometer: 750/800 kg/m3, 330mm, ASTM 314H Hydrometer: 750/800 kg/m3, 330mm, ASTM 314H

GTP-1857
 Hydrometer: 750/800 kg/m3, 330mm, ASTM 314H

<!001>Hydrometer: 800/850 kg/m3, 330mm, ASTM 315H Hydrometer: 800/850 kg/m3, 330mm, ASTM 315H

GTP-1858
Hydrometer: 800/850 kg/m3, 330mm, ASTM 315H

Hydrometer Range 775/825 KG/M3 Hydrometer Range 775/825 KG/M3

GTP-5904
Hydrometer Range 775/825 KG/M3, Plain Form, ASTM 321

Hydrometer Centering Device Hydrometer Centering Device

GTP-8401
Hydrometer Centering Device

Glass Hydrometer Jar w/ Tip-over Ring Glass Hydrometer Jar w/ Tip-over Ring

GTP-1071
Glass Hydrometer Jar complete with plastic Tip Over Ring to protect the glass.
500ML volume. 50mm dia. x 390mm high


See also GamGram 19 for important information about how to read a Hydrometer.

Hydrometer, API, 37 to 49, graduated in 2° increments (no ASTM) Hydrometer, API, 37 to 49, graduated in 2° increments (no ASTM)

GTP-8708
This hydrometer has been shortened to fit in Aljac JM-3001 samplers when the lid is closed.

Adder-External Shell Water Detector Fitting Adder-External Shell Water Detector Fitting

JM-3170
Adder - External Shell Water Detector Fitting for JM-3001

Adder Spring Valve Adder Spring Valve

JM-3175
Adder Spring Valve for JM-3001

Adder-External Hydrokit-Velcon Adder-External Hydrokit-Velcon

JM-3204
Adder Spring Valve for JM-3001

Tray Assembly for Closed Loop MiniMonitor Tray Assembly for Closed Loop MiniMonitor

GTP-9589
Fuel Tester Base Tray Assembly

Syringe for Shell water Detector Kit Syringe for Shell water Detector Kit

JM-3765A-5ML(shown)
Syringe for Shell Water Detector
2 Options Available

Shaft Ball Valve Shaft Ball Valve

6007233230
Shaft Ball Valve for 4L Closed Circuit Sampler Spares

Thermohydrometer, 775/825 kg/m3, -20 to +65C, Non-Mercury Thermohydrometer, 775/825 kg/m3, -20 to +65C, Non-Mercury

GTP-5909-GB
Thermohydrometer, Metric, 775/825 kg/m3 range, -20 to +65C, 0.5 div., non-mercury, non-ASTM.

Glass Tube For Aljac 4L Sampler Glass Tube For Aljac 4L Sampler

GTP-9585-300
Glass Tube For Aljac 4L Sampler

Thermometer, -20 to +60° C, graduated in 0.2° C increments (ASTM 136C) Thermometer, -20 to +60° C, graduated in 0.2° C increments (ASTM 136C)

GTP-3312-1-GB
This thermometer has been shortened to fit in Aljac JM-3001 samplers when the lid is closed. -20 to +60 degrees C, graduated in 0.2 degrees C increments (ASTM 136C).

API Gravity Thermohydrometers API Gravity Thermohydrometers

GTP-915GB (shown)
All thermohydrometers feature divisions every 2 degrees Fahrenheit and 0.1 degree divisions API.
7 Options Available

Metric Density Thermohydrometers Metric Density Thermohydrometers

Divisions every 0.5 degrees Fahrenheit.
7 Options Available

Metric Density Hydrometers Metric Density Hydrometers

Metric Density Plain Form Hydrometers, ASTM-E-100 / BS-718,
Range 650-850 Kg/m3

Pounds per U.S. Gallons Hydrometers Pounds per U.S. Gallons Hydrometers

US Gallons Hydrometers covers jet fuel and Avgas. No thermometers are included. Graduated to 0.01, 320mm length.

ASTM Thermometers ASTM Thermometers

Certified to ASTM E-1 specifications

Thermometer, -5 to +140° F, graduated in 0.5° F increments (ASTM 136F) Thermometer, -5 to +140° F, graduated in 0.5° F increments (ASTM 136F)

GTP-8709GB
This thermometer has been shortened to fit in Aljac JM-3001 samplers when the lid is closed.

Jet/Avgas API Density Test Kit Jet/Avgas API Density Test Kit

GTP-8810-GB
Jet/AVGAS API Density Kit with 3 Thermohydrometers, Jar, and Calulator

SHAFT BUSHING FOR JM-3001 SAMPLER SHAFT BUSHING FOR JM-3001 SAMPLER

Shaft Bushing for JM-3001 Closed Circuit 4L Sampler

Base model **New Design** plus 2nd Chamber with thermometer and hydrometer holders Base model **New Design** plus 2nd Chamber with thermometer and hydrometer holders

JM-8001-16
Aljac Closed Circuit Sampler, with 2nd External Chamber with Thermometer & Hydrometer Holders (New design shown)

4L CLOSED CIRCUIT SAMPLER **NEW DESIGN**with eternal Shell Water Detector 4L CLOSED CIRCUIT SAMPLER **NEW DESIGN**with eternal Shell Water Detector

JM-8001-6
ALJAC 4L **NEW DESIGN **4L CLOSED CIRCUIT SAMPLER, New Design w/eternal Shell Water Detector Fitting, and 2nd chamber with thermometer & hydrometer tubes.